Epson Weighing Indicator XK3190-A1+P - Manual (Page 16)

X K 3 1 9 0 - A 1
+P
3 Clear
Press [ clear ] key, can clean accumulating weight value or stored data.
Step Operating Display Explanation
1 press [ Clear ]
2
press [ 1 ]
[ sure 1 ]
[ sure 0 ]
[ sure 1 ]
Selecting clear/not clear
0: no
1: yes
Example: 1
End
4.9 Insufficient voltage indicating
When the storage cell voltage is insufficient, the insufficient voltage lamp is on. At
this time the indicator will twinkle.You should set the ship-like switch at the back
cover of indicator to “0” to protect the storage cell. Continual using will result in the
further decreasing of the storage cell voltage, in this case the indicator will cut off the
storage cell supply.
5. Maintenance and Announcements
5.1 To guarantee the clarity and using life, the indicator shouldn’t be placed directly under
sunshine and should be placed in the plain space .
5.2 The indicator should avoid dust pollution, vibration and moisture.
5.3 Loadcell should connect with indicator reliably, and the system should be connected into
ground properly. The indicator must be detected from high electrical fields.
▲ ！In order to protect the operator ,indicator, and relevant device, you should
mount lightning rod in thunderstorm frequently happening area.
▲ ！Loadcell and indicator are static sensitive devices, you must adopt anti-
static measures.
5.4 It is strictly forbidden to clean the case of indicator with intensive solvents (for example:
benzene and nitro oils)
5.5 Liquid and electrical conducting particles should not poured onto the indicator, otherwise the