Epson Weighing Indicator XK3190-A1+P - Manual (Page 5)

X K 3 1 9 0 - A 1
+P
2.2 Keyboard Function
Key Function
1 [ACCU],[ UNIT
PRICE]
No meaning
2 In calibration mode, pressing [PRE-TARE/2] , can input
digital key “2”; In weighing mode, the key is used for
presetting tare.
3 [DELETE/4] In calibration mode, pressing [DELETE/4], can input digital
key “4”; In weighing mode, it is deleting function key , more
details shown in episode “deleting”.
4 [CHECK/5] In calibration mode, pressing [CHECK/5], can input digital
key “5”; In weighing mode, it is checking function key ,
more details shown in episode “checking”.
5 [DATE/6] In calibration mode, pressing [DATE/6] can input digital
key “6” ;In weighing mode, it is date function key , more
details shown in episode “setting of time and date”.
6 [SET PRINT] In calibration mode, pressing [SET PRINT] can input digital
key “7” ;In weighing mode, it is printing setup key , more
details shown in episode “printing function”.
7 [CALB/8] In calibration mode, it is calibration function key ; In other
operation modes it only inputs digital key “8”
8 [TIME/9] In calibration mode, pressing [TIME/9] can input digital key
“9” ;In weighing mode, it is time function key , more details
shown in episode “setting of time and date”.
9 [STORE/0] In calibration mode, pressing [STORE/0] can input digital
key “0” ;In weighing mode, it is storing function key , more
details shown in episode “storing data”.
10 [ACCU/1],[ UNIT
PRICE/3]
In calibration mode, pressing [ACCU/1] or [ UNIT
PRICE/3] can input digital key, “1”; “3”;In weighing mode,
there are no meaning.
11 In weighing mode, when stable sign appears, press [TARE] key to clear tare. If
indicator displays zero, the weight value is net weight.
12 In weighing mode, when stable sign appeares, press [ZERO] key to clear limited
weight on the platform. You can set zero range , generally the zero range is 4% of full
scale.
13 In weighing mode, when stable sign appears, press [PRINT] key to print weight data.
14 In calibration mode, press [ENTER] key to confirm that parameters have been inputted
and will enter to next parameter setting automatically. When indicator is in date, time,
printing and communication setting mode, push [ENTER] key to confirm that
parameters have been inputted.