Epson Weighing Indicator XK3190-A1+P - Manual (Page 2)

X K 3 1 9 0 - A 1
+P
1 . Specifications
2 . Installation
2.1 Front & Back View of Indicator
2.2 Keyboard Function
2.3 Connecting Loadcell to Indicator
3. Calibration
4. Operating Instructions
4.1 Starting and Starting auto zero setting at turning on
4.2 Manual Zero Setting (Semi-automatically setting zero )
4.3 Tare Function
4.4 Connecting Scoreboard to Indicator
4.5 Connecting Pinter to Indicator
4.6 Connecting Serial Communication port to Indicator
4.7 Setting of Time and Date
4.8 Storing, Checking and Deleting of Data
4.9 insufficient voltage indication
5. Maintenance and Announcements
6. Errors and Information
Important Notes!!!
1． Printer interface invalid due to the built-in micro-printer (optional supply upon
special requirement)
2． The function key is used as the paper roll key, it works upon pressing and stops
working upon releasing.
3． “5” should be chosen as printer parameter TypE
4． There is only one print format - linked bill format when micro-printer used.
5． The discount ratio printer option must be off while using:
“odE=0”
“dct=0”