Silvercrest SCAW 5.00 B2 - Manual (Page 210)

SilverCrest SCAW 5.00 B2
208 - English
Name Button Function
Menu button
(14) Press the Menu button to open the menu for the current
operating mode.
Mode button
(15) Press this button to toggle between the different
operating modes (Movie, Photo and Setup).
Display button
(16) This button lets you show or hide information about the
current settings (icons) for the selected mode or turn off
the display.
Switching the camcorder on and off

Press the On/Off button (12) to switch the camcorder on. The power light (5) goes
green.

Press the On/Off button (12) to switch the camcorder off. The power light (5) then
goes out.
When you open the display (17), the camcorder switches itself on
automatically. When you close the cover, it switches itself back off again,
providing you are not recording a movie.
The following table shows an overview of the different statuses of the power indicator (5):
Colour Description
Green Powered on
Flashing orange/green Recording in progress
Orange Data processing in progress
Flashing green
Photo self-timer enabled
Fast flashing green Photo self-timer enabled, last 2 seconds