Silvercrest SSMT 1000 A1 - Manual (Page 61)

SSMT 1000 A1 mobile phone
English - 59
Here you can enter a list of preferred networks and assign a priority order. After pressing the call key [14] the
following options are available:
1. Add from list
When this setting is selected a list of possible networks is shown. Use the up/down keys [8] to select the required
operator manually. Confirm your selection by pressing the call key [14] twice.
2. New
Enter the network operator manually by entering the MobileCountryCode (MCC) / MobileNetworkCode (MNC). The
entry is added to the end of the list and is given priority as per its number in the list.
Ask your network operator for the required MobileCountryCode (MCC) and MobileNetworkCode
(MNC). To do so, contact your network operator.
3. Change priority
Change the priority (1=high) of a network operator using the up/down keys [8]. Save your alterations by pressing the
call key [14].
4. Custom
1. Tone settings
Here you can set the "1. Incoming call", "2. Message" and "3. Keypad" tone settings. Select the required option by
pressing the up/down keys [8] and press the call key [14] to confirm your selection. Finally you can select the
required tone setting from a list by pressing the up/down keys [8]. Confirm your selection by pressing the call key
[14].