Silvercrest SSMT 1000 A1 - Manual (Page 62)

SSMT 1000 A1 mobile phone
60 - English
2. Alert type
Here you can set the ringtone and type of vibration. Use the up/down keys [8] to select one of the following settings:
"Ring only", "Vib. only", "Vib. and ring" or "Light only" and confirm with the call key [14] to select the chosen ringtone
and type of vibration.
3. Volume
Here you can set the "1. Ringtone" and "2. Key tone" volumes. Select the required settings by pressing the up/down
keys [8] and press the call key [14] to confirm your selection. Now use the up/down keys [8] to set the desired
volume. Save your selected setting by pressing the call key [14].
5. Change password
1. SIM lock
Whether the mobile phone requests a PIN code can be turned on and off here. To change the status press the call key
[14].
Before you press the key a short message will be shown on the screen above the key indicating
whether you enable or disable the PIN code function.
Enter your PIN code and confirm the entry by pressing the call key [14]. The screen will briefly display whether the
function is turned on or off.
If you enter the PIN code incorrectly three times you will be locked out. To unlock the phone the PUK
number will then need to be entered The PIN code and PUK number can be obtained from your
network operator. If you have misplaced your PIN code or PUK number please contact your network
operator.