Silvercrest COCOON 1450 User Manual
Page 22
20
Handset - settings and operation
Cocoon 1450
5. Press
2
to confirm.
•
The current volume is displayed and can be heard.
6. Press
3
or
11
repeatedly to set the desired volume.
7. Press ‘Save’
2
to confirm your selection or press
14
to quit the menu without
saving the setting.
Info
Press the ‘Silent’ display key to switch off the ringer on the handset
during a call.
To turn off the handset ringer permanently, press and hold
10
for
approximately 2 seconds. The
icon and the ‘Ringer Off’
message appear in the display. To reactivate the ringer, press and
hold
10
again for 2 seconds.
4.15 Setting the ringer melody on the handset
You can change the ringer melody for an incoming call (internal or external). The device has
18 different ringer melodies for you to choose from (1-18).
The default setting for the ring tone for an external call is melody 10.
The default setting for the ring tone for an internal call is melody 1.
4.15.1 Setting a ringer melody for internal and external calls (1-18)
1. Press
2
.
•
Press
3
or
11
repeatedly, select ‘Handset’.
2. Press
2
to confirm.
3. Press
3
or
11
repeatedly, select ‘Ring Tone’.
4. Press
2
to confirm.
5. Select ‘External’ or ‘Internal’ and press
2
.
•
The current melody is displayed and can be heard.
6. Press
3
or
11
repeatedly, to select the desired melody.
7. Press ‘Save’
2
to confirm your selection, or press
14
to quit the menu without
saving the setting.
4.16 Setting the key lock
You can lock the keypad against unintentional entries. It is, however, still possible to pick up
incoming calls even with the keypad locked.
Enabling or disabling the keypad lock:
1. Enable: press
7
and hold for approximately 2 seconds.
•
The display shows ‘Keypad Locked’ briefly and the key lock icon
appears in the
display.
2. Disable: press ‘Unlock’
14
, then
7
to unlock the keys again.
•
‘Keypad Unlocked’ appears briefly in the display.
4.17 Keypad beep On/Off
You can set the handset so that a beep is heard every time a key is pressed.
1. Press
2
.
2. Press
3
or
11
repeatedly, select ‘Handset’.
3. Press
2
to confirm.
4. Press
3
or
11
repeatedly, select ‘Keypad Beep’.
5. Press
2
to confirm.