Silvercrest COCOON 1450 User Manual
Page 34
32
Answering machine
Cocoon 1450
9.2.2 Play back or delete outgoing messages
1. Press
2
.
2. Press
3
or
11
repeatedly, select ‘Ans Machine’.
3. Press
2
to confirm.
4. Press
3
or
11
repeatedly, select ‘Outgoing Msg.’.
5. Press
2
to confirm.
6. Press
3
or
11
repeatedly, select ‘Play Message’.
7. Press
2
to confirm.
8. Select ‘Answer & Record’ for outgoing message 1 or ‘Answer Only’ for
outgoing message 2.
9. Press
2
to confirm. The message will be played back.
10. Press ’Delete’ or ‘Stop’ to interrupt.
9.2.3 Selecting outgoing message for answering machine operation
1. Press
2
.
2. Press
3
or
11
repeatedly, select ‘Ans Machine’.
3. Press
2
to confirm.
4. Press
3
or
11
repeatedly, select ‘Ans Settings’.
5. Press
2
to confirm.
6. Press
3
or
11
repeatedly, select ‘Answer Mode’.
7. Press
2
to confirm.
8. Select ‘Answer & Record’ for outgoing message 1 or ‘Answer Only’ for
outgoing message 2.
9. Press
2
to confirm.
Important
If the memory is full, only outgoing message 2 will be played
(answering machine only, without the opportunity to record a caller's
message).
When a call is received and if the answering machine is switched on, the answering machine
picks up the call automatically after the preselected number of rings in the operating mode
selected (see above, outgoing message 1 or 2). If
•
outgoing message 1 has been selected, a beep is heard after the outgoing message and
the caller is able to leave a message (maximum 3 minutes).
•
outgoing message 2 has been selected, it is played. After the beep, the line will
automatically be disconnected. The caller does not have the opportunity to leave
a message.
Info
If nothing is said in the +/-7 seconds after the call is picked up, the
line is automatically disconnected.
9.3
Switching the answering machine on/off
The
icon is displayed if the answering machine is switched off. If the answering machine
is switched on, the
icon is displayed and the answering machine picks up the call after
a specified number of rings (see “9.5 Setting the number of rings”).
1. Press
2
.
2. Press
3
or
11
repeatedly, select ‘Ans Machine’.
3. Press
2
to confirm.