Silvercrest COCOON 1450 User Manual
Page 25
23
Cocoon 1450
Clock and alarm functions
ENGLISH
5.2
Select hour format
1. Press
2
.
2. Press
3
or
11
repeatedly, select ‘Time’.
3. Press
2
to confirm.
4. Press
3
or
11
repeatedly, select ‘Set Time Format’.
5. Press
2
to confirm.
6. Select the time format (12 hour or 24 hour display) and press
2
.
5.3
Alarm function
Important
Set the data and time before you use this function so that the alarm
goes off at the correct time.
You can set different alarms for the handsets registered to the base unit. The alarm rings only
on the relevant handset and not at the base unit or on any other handset.
The alarm icon
appears in the display in standby mode if an alarm has been set.
5.3.1 Setting an alarm
1. Press
2
.
2. Press
3
or
11
repeatedly, select ‘Alarm/Clock’.
3. Press
2
to confirm.
4. Press
3
or
11
repeatedly, select ‘Set Alarm’.
5. Press
2
to confirm.
6. Press
3
or
11
repeatedly and select one of the four possible settings: ‘Once’,
‘Every Day’, ‘Mon to Fri’ or ‘Off’. Confirm with
2
. When you select ‘Once’,
‘Every Day’ or ‘Mon to Fri’ , the display shows:
Time (24hr):
07:00
7. Enter the alarm time required using four digits and press ‘Save’.
8. Press
3
or
11
repeatedly and select one of the 18 possible alarm melodies and
press ‘Save’
2
.
9. Select ‘Off’ to turn off the alarm function. Confirm with
2
.
5.3.2 Switching the alarm off
1. Switch the alarm off when it sounds by pressing ‘Stop’
14
.
2. Press ‘Snooze’
2
to repeat the alarm function 5 minutes later.
5.4
Appointments
You can set five appointments or reminders to which you can assign a name and an alarm
by date and time.
1. Press
2
.
2. Scroll with
3
or
11
to ‘Tools’ and press
2
.
3. The ‘Appointment’ menu item is already highlighted. Press
2
.
4. Scroll with
3
or
11
to one of the five appointments and press
2
.
5. Using
3
or
11
and then
2
select from the following options:
–
‘Edit’ to edit the settings for the appointment. Edit the name of the appointment and
press ‘Save’
2
. Enter the date for the appointment and press ‘Save’
2
. Enter the
time and press ‘Save’
2
. Using
3
or
11
select the alarm melody required
(18 melodies) and press ‘Save’
2
.