Silvercrest SWED 500 A1 - Manual (Page 153)

SilverCrest SWED 500 A1
English - 151
Below is a description of how to set up AL1. AL2 can be set in the same way. If
no buttons are pressed for five seconds during set-up, the settings will be
accepted and the set-up mode will be ended.
 Press the 'VOL-/AL1' button (2) for about one second. The time in hours will
flash on the screen (5).
 Now use the 'UP' (13) or 'DOWN' (15) buttons to set the desired time for
the alarm. You can also hold down the buttons to move more quickly through
the numbers. To accept the settings, briefly press on the 'VOL-/AL1' button
(2).
 Now you can choose which weekdays the alarm time should apply to. You
can use the "UP" (13) or "DOWN" buttons to continue choosing the
following alternatives.
All weekdays
Individual weekdays
Weekdays from Monday to Friday
Weekends Saturday and Sunday
To accept the settings, briefly press on the
'VOL-/AL1' button (2).
 You can now use the 'UP' (13) or 'DOWN' (15) buttons to set the alarm
volume. Please note that the alarm volume setting only applies if it is the
radio that is being used as an alarm. The volume of the buzzer alarm is
unaffected by this setting.
The alarm time has now been set.
Activate the alarm
Below is a description of how to set up AL1. The same procedure applies to
AL2.
When you have set the alarm time, you can activate the alarm function as
follows: