Edirol V-8 - Manual (Page 106)

Effect List (continued)
106
If you’ve assigned an effect that has an “ ✽ ” (asterisk) following its effect name, you can use the [CONTROL] fader to modify the following
settings. The EFFECTS button whose settings can be modified will blink (p. 42).
Effects that Can Be Controlled by the [CONTROL] Fader
No. Effect name Setting controlled by the [CONTROL] fader
012: STROBE ✽ Change the spacing at which the still images will be output (nine levels).
017: AFTERIMAGE ✽ Change the time that the afterimage is shown (four levels).
022: FEEDBACK ✽ Change the strength of the effect over four levels.
023:
:
028:
SHAKE1 ✽
:
SHAKE6 ✽
Adjusts the speed at which the image will shake.
033: NEGATIVE ✽ Change the portion that is inverted (“Invert brightness and color,” “Invert color,” “Invert brightness”).
042: COLORIZE ✽ Change the colorization pattern (eight types).
051: FINDEDGE ✽ Smoothly changes the color of the outline edge and background.
060: SILHOUETTE ✽ Smoothly changes the color applied to the image.
069: MONOCOLOR ✽ Smoothly changes the color of the color filter.
078: EMBOSS ✽ Smoothly changes the color applied to the image.
083: POSTERIZE ✽ Change the strength of the effect (four levels).
092: COLORPASS ✽ Change the color that remains (eight types).
094: W-LUMIKEY ✽ Change the white luminance level.
096: B-LUMIKEY ✽ Change the black luminance level.
098: CHROMAKEY ✽ Change the chromakey level.
102: FLIP ✽ Change the direction in which the image is flipped (“Flip left/right/top/bottom,” “Flip top/bottom,” “Flip left/right”).
110: MULTI-H ✽ Change the pattern by which the image is divided vertically (seven types).
118: MULTI-V ✽ Change the pattern by which the image is divided horizontally (seven types).
126: MULTI-HV ✽ Change the pattern by which the image is divided horizontally and vertically (seven types).
131: MIRROR-H ✽ Change the pattern by which the image is divided vertically (four types).
136: MIRROR-V ✽ Change the pattern by which the image is divided horizontally (four types).
141: MIRROR-HV ✽ Change the pattern by which the image is divided horizontally and vertically (four types).
150: PinP ✽
Changes the position (eight types) of the subscreen.
The position of the subscreen will reflect the “142: PinP1”–“149: PinP8” settings (p. 44).
V-8_e.book 106 ページ ２０１０年４月１６日 金曜日 午後５時１４分