Edirol V-8 - Manual (Page 86)

Menu List (continued)
86
Main menu
(First level)
Sub-menu
(Second level)
Value
(The factory setting is printed in bold characters.)
See
page
MIDI-related settings are made here. Transmits the settings to MIDI-connected
devices
--- p. 69
Returns the sub-menu settings to the factory-
set state.
--- p. 34
Settings for the V-8 itself Turns memory protect on/off
Off, On p. 25
Adjusts the video input synchronization signal
level
-48– 0 –+79 p. 56
Adjusts the brightness of the image being
input to bus A.
-60– 0 –+61
Adjusts the color of the image being input to
bus A.
-10– 0 –+11
Adjusts the hue of the image being input to
bus A.
-125– 0 –+126
Adjusts the brightness of the image being
input to bus B.
-60– 0 –+61
Adjusts the color of the image being input to
bus B.
-10– 0 –+11
Adjusts the hue of the image being input to
bus B.
-125– 0 –+126
Adjusts the horizontal size of the final output
image.
0 –30 p. 57
Adjusts the vertical size of the final output
image.
0 –30
Adjusts the black level reference (setup level)
of the output signal.
0 IRE , 7.5 IRE
Sets the mode used for video fader operating
Normal , Quick p. 78
Sets the video fader operating curve
Curve-A , Curve-B, Curve-C p. 78
Calibrates the video fader for bus A
--- p. 77
Calibrates the video fader for bus B
---
Transition time when the INPUT SELECT
buttons are operated
0– 10 –30 (Field) p. 35
MIDI Setup (continued) MIDI Bulk Dump
MIDI Reset
Utility Memory Protect
Video Sync Threshold
VideoA Bright Adjust
VideoA Color Adjust
VideoA Hue Adjust
VideoB Bright Adjust
VideoB Color Adjust
VideoB Hue Adjust
Video Display Range H
Video Display Range V
Video Out Black Level
Video Fader Mode
Video Fader Curve
Video Fader Calibrate A
Video Fader Calibrate B
Input Select Delay Time
V-8_e.book 86 ページ ２０１０年４月１６日 金曜日 午後５時１４分