Edirol V-8 - Manual (Page 57)

57
Editing the Input/Output Settings (continued)
Input/output
settings
Intr
oduction
Connections
Basic operation
Switc
hing ima
g
e
s
Eff
ects
BPM sync
External de
vices
Video fader
Appendices
Here’s how to adjust the image that’s being output from the V-8.
1
Press the [MENU] button to access the menu, and choose “Utility.”
Press the [MENU] button to access the menu.
Use the [ ] [ ] buttons to select “Utility.”
Press the [ENTER] button to confirm your selection.
2
Referring to the table below, use the [ ] [ ] buttons to select the menu item that you want to
adjust, and press the [ENTER] button.
3
Use the [ ] [ ] buttons to edit the value.
4
Press the [MENU] button several times to close the menu.
Menu item Explanation
Video Display Range H Adjusts the horizontal size of the final output image.
Video Display Range V Adjusts the vertical size of the final output image.
Video Out Black Level Adjusts the black level reference (setup level) of the output signal.
PAL and Japanese NTSC use the “0 IRE” setting, and United States NTSC uses the “7.5 IRE”
setting.
Adjusting the Output Image
V-8_e.book 57 ページ ２０１０年４月１６日 金曜日 午後５時１４分