Edirol V-8 - Manual (Page 9)

9
Input/output
settings
Intr
oduction
Connections
Basic operation
Switc
hing ima
g
e
s
Eff
ects
BPM sync
External de
vices
Video fader
Appendices
Video Signal Flow
You can use the input selector to choose any two of the video signals coming into the eight input jacks. These two video
signals are sent to bus A and bus B of the video mixer section.
The video signals sent to bus A and bus B are mixed in the video mixer section. The mixed signal then passes through the
output fader and is sent from the output jack.
☞ For details on the structure of the mixer, refer to “Block Diagram” (p. 108).
fig.signal-flow-e.eps
* The preview output will also show the settings menu of the V-8 overlaid with the image (p. 23).
* INPUTs 5–7 provide composite connectors and S-video connectors. If an image is being input to both connectors of the
same channel, the input from the S-video connector will take priority.
* INPUT 8 provides both an S-video connector and a PC connector. If an image is being input to both of these, the input
from the S-video connector will take priority.
Preview output
Input selector
Video mixer
Preview selector
Video device Computer
Final output
PREVIEW OUT
INPUT1 INPUT2 INPUT3 INPUT4 INPUT5 INPUT6 INPUT7 INPUT8 PC1 PC2
OUTPUT
Output fader
Inside of the V-8
Bus A
Effects
Fader
Bus B
Effects
Fader
PC input selector
Scan converter
V-8_e.book 9 ページ ２０１０年４月１６日 金曜日 午後５時１４分