Edirol V-8 - Manual (Page 87)

87
Input/output
settings
Intr
oduction
Connections
Basic operation
Switc
hing ima
g
e
s
Eff
ects
BPM sync
External de
vices
Video fader
Appendices
Menu List (continued)
*5 The factory setting varies depending on the country.
Settings for the V-8 itself Adjusts the white level of the [OUTPUT
FADE] fader
0– 200 –255 p. 32
Adjusts the black level of the [OUTPUT
FADE] fader
0 –255
Specifies the settings shown in the preview
monitor
No display, Mode1, Mode2 , Mode3 p. 27
Specifies the selection method for the
preview output
Manual , Prev Auto, Always-1–8,
Always-Out, Auto1-2–1-8, Auto1-Out
p. 22
Specifies the automatic transition time for the
preview output
1– 5 –10
Turns on/off the preview output when no
signal is present
Off, On p. 22
Specifies the preview output color when no
signal is present
Cyan , Yellow, Red, Blue, SkyBlue, Green,
Orange, Magenta
Turns on/off blue-back output when no signal
is present
Off , On p. 21
Adjusts the horizontal location of the on-
screen display
-15– 0 –+15 p. 25
Adjusts the horizontal location of the on-
screen display
-5– 0 –+5
Turns color bar output on/off
Off , On p. 58
Returns the sub-menu settings to the factory-
set state.
--- p. 34
Switches between NTSC and PAL.
NTSC, PAL p. 59
This restores the V-8 to its original factory default settings.
--- p. 33
Main menu
(First level)
Sub-menu
(Second level)
Value
(The factory setting is printed in bold characters.)
See
page
Utility (continued) OutFade White Level
OutFade Black Level
Preview Display Mode
Preview Switch Pattern
Preview Auto Speed
Preview Signal Check
Preview No Signal Color
No Signal Blueback
OSD Horizontal Locate
OSD Vertical Locate
Color Bar Out
Utility Reset
NTSC/PAL * 5
Factory Reset
V-8_e.book 87 ページ ２０１０年４月１６日 金曜日 午後５時１４分