Epson Stylus Office TX600FW - Manual (Page 10)

10 Faxing Photos or Documents
Faxing Photos or Documents
Handling Originals
When faxing, you can select the automatic
document feeder or the document table.
See "Placing Originals in the Automatic
Document Feeder" and "Placing Originals
on the Document Table" in the Basic
Operation Guide.
Handling Paper
Before receiving faxes, make sure you load
A4-size plain paper into the sheet feeder.
See "Loading Paper" in the Basic Operation
Guide. Also, make sure the Auto
Reduction setting is set to On
(& "Selecting Send/Receive Settings" on
page 13).
Note:
If the incoming fax pages are larger than
A4-size, the fax size is reduced to fit or printed
on multiple pages, depending on the Auto
Reduction setting you select.
Sending Faxes
Before sending a fax, place your original in
the automatic document feeder or on the
document table. Then send your fax by
entering a fax number, redialing the
previous fax number, or selecting an entry
from your speed dial list.
Entering or redialing a fax
number
1. Press Home to select Fax, and then
press OK.
Note:
If you place your original in the automatic
document feeder, the
icon is displayed.
2. Use the keys on the numeric keypad to
enter the fax number. You can enter up
to a maximum of 64 digits.
If you want to redial the last fax number
you used, press
[Redial/Pause]
instead of entering a fax number. The last
fax number is displayed on the LCD
screen.
Note:
❏ If you want to change Color Mode, press
u or d to select Color or B&W.
❏ If you want to change resolution or
contrast, press x Menu, and then you
see Fax Send Setting and press OK.
Press u or d to select the item that you
want to change, and then press r. You
can set or change these settings.
❏ You can also set the time that you want to
send your fax (& "Transmission timer" on
page 12)
3. Press OK. You see the sending
information screen.
4. Press x Start.
Note:
❏ Color faxes cannot be stored in memory,
so the printer dials the fax number and
faxes your document in real time.
❏ If the recipient's fax machine prints only
in black and white, your fax data is
automatically sent in black and white
even if you select Color or B&W.
❏ If you need to cancel faxing at any time,
press y Stop/Clear.