Epson Stylus Office TX600FW - Manual (Page 14)

14 Faxing Photos or Documents
Printing Reports
1. Load plain paper into the sheet feeder.
2. Press Home to select Fax and then
press OK.
3. Press x Menu.
4. Press l or r to select Fax Report and
then press OK.
Last
Transmission
Report Off, On Error (default),
On Send
Indicates whether or
when the product prints
a report for outgoing
faxes. Select Off to turn
off report printing, select
On Error to print reports
only when an error
occurs, or select On
Send to print reports for
every fax you send.
Dial Mode Tone (default), Pulse
This setting may not be
displayed depending on
the region.
Indicates the type of
phone system to which
you have connected the
product.
DRD All (default), Single,
Double, Triple, Double
& Triple
This option may be On
or Off depending on the
region.
Indicates the type of
answer ring pattern you
want to use to receive
faxes. You must have
set up your phone
system to use different
ring patterns to select an
option other than All (or
Off).
ECM On (default), Off
Indicates whether you
use Error Correction
Mode to automatically
request retransmission
of fax data that is
received with detected
errors.
Setting and
Options Description
V.34 On (default), Off
Indicates the speed at
which you transmit and
receive faxes.
On is 33.6 Kbps and Off
14.4 Kbps.
Rings to
Answer 1, 2, 3, 4, 5, 6, 7, 8, 9
The default value varies
by region. This setting
may not be displayed or
the range of values may
differ depending on the
region.
Indicates the number of
rings that must occur
before the product
automatically receives a
fax.
Dial Tone
Detection On (default), Off
When this is set to On,
the product dials
automatically when it
detects a dial tone.
It may not be able to
detect a dial tone when
a PBX (Private Branch
Exchange) or a TA
(Terminal Adaptor) is
connected. In that case,
set to Off.
Setting and
Options Description