RISCO Group ProSYS Version 7.xx - Manual (Page 11)

ProSYS Version 7.XX - Supplementary Instructions 11
Bus Zone Parameters: iWISE DT AM Grade 3
Quick Keys Parameter Default Range
[2][0][3][zz]
[8] [1] Remote (manual)
The remote self test is performed by the system when a user
manually selects the Diagnostics option from the Maintenance menu
via the ProSYS User Functions menu.
[2][0][3][zz]
[8] [2] Local (automatic)
Once an hour, the detector automatically checks that the detector’s
channels are functioning properly.
Bus Zone Parameters: iWISE QUAD Grade 2
Quick Keys Parameter Default Range
[2][0][3][zz]
[1] LEDS On
Defines the LEDS operation mode.
[2][0][3][zz]
[1] [1] to [2] LEDS Options
1) Off - Disables the LEDS operation.
2) On – Enables the LEDS operation.
[2][0][3][zz]
[2] Sensitivity Normal
Defines the sensitivity of the detector (PIR).
[2][0][3][zz]
[2] [1]to[2] Sensitivity Options
1) Low 2) High
[2][0][3][zz]
[3] Self Test Remote
Used to test the detection technologies. In the event of a failed test, a
Self Test Trouble is created.
[2][0][3][zz]
[3][1] Remote (manual)
The remote self test is performed by the system when a user
manually selects the Diagnostics option from the Maintenance menu
via the ProSYS User Functions menu.
[2][0][3][zz]
[3][2] Local (automatic)
Once an hour, the detector automatically checks that the it's
channels are functioning properly.