RISCO Group ProSYS Version 7.xx - Manual (Page 12)

12 ProSYS Version 7.XX - Supplementary Instructions
Bus Zone Parameters: iWISE QUAD AM Grade 3
Quick Keys Parameter Default Range
[2][0][3][zz]
[1] LEDS On
Defines the LEDS operation mode.
[2][0][3][zz]
[1] [1] to [2] LEDS Options
1) Off - Disables the LEDS operation.
2) On – Enables the LEDS operation.
[2][0][3][zz]
[2] Sensitivity Normal
Defines the sensitivity of the detector (PIR).
[2][0][3][zz]
[2] [1]to[2] Sensitivity Options
1) Low 2) High
[2][0][3][zz]
[3] Anti-Mask Enable
Defines the operation of Anti Masking detection.
[2][0][3][zz]
[3] [1]to[2] Anti-Mask Options
1) Disable 2) Enable and behaves according to the settings defined
in quick keys [2][0][3][zz][4] .
[2][0][3][zz]
[4] Arm/Disarm No
Defines the operation of the anti masking feature while the detector
is armed or disarmed.
[2][0][3][zz]
[4][1] Arm/Disarm Options
1) No – When detector is armed or disarmed Anti-mask behaves
according to the settings defined in quick keys [2][0][3][zz][3]
2) Yes – When detector is armed Anti-mask is disabled. When
detector is disarmed Anti-mask behaves according to the settings
defined in quick keys [2][0][3][zz][3].
[2][0][3][zz]
[5] Self Test Remote
Used to test the detection technologies. In the event of a failed test, a
Self Test Trouble is created.
[2][0][3][zz]
[5][1] Remote (manual)
The remote self test is performed by the system when a user
manually selects the Diagnostics option from the Maintenance menu
via the ProSYS User Functions menu.
[2][0][3][zz]
[5][2] Local (automatic)
Once an hour, the detector automatically checks that the detector’s
channels are functioning properly.