RISCO Group ProSYS Version 7.xx - Manual (Page 5)

ProSYS Version 7.XX - Supplementary Instructions 5
Bus Accessories
The information in this section describes new accessories that have been added
to the ProSYS Bus and modifications that have been implemented in parameters
under the Installer programming menu.
Touchscreen Keypad
There is a new 7" Touchscreen keypad with a slim and contemporary design. The
Touchscreen Keypad is compatible with any ProSYS version and is available with
or without a proximity reader.
Adding/deleting the Touchscreen keypad is identical to the procedure for the
adding/deleting of current ProSYS keypads.
Zone Expanders with TEOL Termination
There are two new wired zone expanders that support TEOL termination. See
TEOL explanation above.
When adding/deleting a zone expander there are two new types to choose from:
x G3Z08 (8 hardwired zone expander with TEOL termination)
x G3Z16 (16 hardwired zone expander with TEOL termination)
Note:
The current DEOL Zone Expander (ProSYS EZ8/EZ16/EZ8F) can still be used.
Bus Zone Expanders
A new wired Bus Zone Expander enables to expand the number of Bus zone
detectors in the ProSYS.
When adding/deleting a Bus Zone Expander select from the following options
depending on the amount of zones you want to use:
x BZE08 (8 Bus zone expander)
x BZE18 (16 Bus zone expander)
x BZE24 (24 Bus zone expander)
x BZE32 (32 Bus zone expander)
For detailed information refer to the instructions supplied with the Bus Zone
Expander.
Fast PSTN Modem - 2400 BPS
The Fast PSTN Modem enables PSTN communication at 2400 Bps between a
remote PC and the ProSYS security panel when programming the system using
the Upload/Download software.
Important:
Communication with the fast modem is supported by ProSYS Version 7 and above and by
Upload/Download software version 3.2.3.6 and above.
Adding the Fast PSTN Modem to ProSYS:
1. Access the Installer menu and select [7] Accessories > [1] Add Delete Module >
[9] More.. > [7] XMODEM.
Set the Type field to XModem.