Toolbag keeps all testing components in one place, Tubing accessory kit, Power cord – Retrotec DucTester 341 User Manual
Page 22: 9v power supply adapter for charging dm32 gauge, Additional parts and accessories for the ductester
Page 22 of 83
©Retrotec Inc. 2014
5.4.4.
Toolbag keeps all testing components in one place
The Deluxe Cordura Tool bag provides enough volume to hold all the system
components of a DucTester System. It includes a shoulder strap for easy carrying.
The vented exterior pocket is an important feature, useful for storing your smoke
puffer which will destroy your gauge and laptop if stored together.
5.4.5.
Tubing Accessory Kit
The Tubing Accessory Kit comes with blue, red, yellow and green pressure
tubes (approximately 37 ft each, 1/8” inner diameter), four short male-to-male
pressure tube connectors, two T-connectors for pressure tubes, a Static
Pressure Probe, and a copper wire. Attaching a Static Pressure Probe to the
pressure tube can prevent pressure reading interferences from wind or other air flows blowing on the
pressure tube. The copper wire can be inserted into a pressure tube to prevent it from bending, and
affecting the pressure reading.
5.4.6.
Power Cord
The power cord is used to power your Model 300 fan. Once it is connected to a
wall outlet, the Mains Power status light turns green, indicating power is
connected.
5.4.7.
9v Power Supply adapter for charging DM32 gauge
A battery charger is included to charge the DM32 gauge’s batteries. For
instructions on charging the DM32 batteries refer to the DM32 Manual.
5.4.8.
Additional parts and accessories for the DucTester
For options and accessories look at:
For parts, look at:
http://retrotec.com/products/accessories-parts
.....................................................................................all on the Retrotec website
For more information on these parts, contact