Rear panel overview – RIGOL DSG3000 Series User Manual
Page 59
Advertising
RIGOL
DSG3000 Quick Guide
9
Rear Panel Overview
The rear panel of DSG3000 series RF signal generator is as shown in the figure
below.
1 2 3 4 5 6
7 8 9 10 11 12 13
Figure 2 Rear Panel
1. USB Device
It is used to connect the PC to realize remote
control.
2. USB Host
It is used to connect the USB storage device
to update the system or store system state
and sweep list. You can also connect the USB
power sensor or RX1000.
3. LAN
It is used to connect the PC or network to
realize remote control.
Advertising