Rosen Aviation 0602 Series : Single-Disc Blu-ray Player with SDI - Manual (Page 11)

Rosen Aviation Blu-ray DVD Player with SDI
Document Number: 105880 Revision: B
Date: 09/19/13
Template: 4.4.1.6FM2; Revision A; 12/06/12 Page 11 of 33
5. INPUTS AND OUTPUTS
Inputs that control the Blu-ray DVD player can come from the unit’s front panel, a universal IR
remote, or via a cabin management system using RS-232 or RS-485.
5.1. Control Inputs / Outputs
 RS-485 (see Section 5.4.2 , RS-485 , on page 14 )
 RS-232 (see Section 5.4.3 , RS-232 , on page 14 )
 IR Remote Input (see Section 5.4.1 , IR Control , on page 13 )
 Cabin Brief / Pause Input
The Cabin Brief / Pause option can be controlled by a switch or by the cabin
entertainment system. The Blu-ray DVD player stays in Pause while the cabin
briefing pause input is held low.
 Status Output
Status output is normally open. The status output connects to ground when the player
is in error mode, such as over-temperature.
5.2. Audio/Video Outputs
The following outputs are available on the Blu-ray DVD Play with SDI.
 Two scrambled 3G HD-SDI outputs
To display the SDI video from the Blu-ray DVD Player, a Rosen monitor or Audio
Video Distribution System capable of unscrambling the signal is required.
 Two CVBS (Composite) Out
1 Vpp into 75 ohms. NTSC or PAL.
 One Component (YPbPr) Out
Y: 1 Vpp into 75 ohms, YPr/Pb: 0.7 Vpp into 75 ohms.
 DVI/HDMI Out
TMDS with HDCP. Digital video and up to 7.1 digital audio.
 Stereo analog Audio Out (fixed volume)
2V RMS, adjustable volume. (Fixed volume adjustment may cause brief video glitch
while command is set.)
 7.1 Analog Audio Out (volume controlled)
2V RMS, user adjustable volume. Audio delay is adjustable for lip-sync.
 SPDIF Digital Audio Out
Coaxial