KEPCO TMA VXI-27 - Manual (Page 34)

TMA VXI -27 101602
3-17
command or query. The power supply sets this bit for
– MEAS:VOLT? 10,1 — The 10 is the number of digits and the 1 is the range. Since
this capability is not implemented in Kepco power supplies, the Command Warning
bit is set.
– INST:SEL 2 sent to a single power supply. Trying to select unit 2 when only one
power supply is connected causes the Command Warning bit to be set.
FIGURE 3-6. STATUS REPORTING STRUCTURE