Enterasys Networks Security Router X-PeditionTM User Manual

Page 138

Advertising
background image

Configuring RIP Examples

5-36 Configuring IP

XSR(config-if<F1>)#ip address 192.168.1.100 255.255.255.0
XSR(config-if<F1>)#ip access-group 1 in
XSR(config-if<F1>)#ip access-group 1 out

XSR(config)#interface serial 1/0
XSR(config-if<S1/0>)#no shutdown
XSR(config-if<S1/0>)#media-type V35
XSR(config-if<S1/0>)#encapsulate ppp
XSR(config-if<S1/0>)#ip address 154.68.1.47 255.255.255.0

XSR(config)#router rip
XSR(config-router)#network 154.68.1.0
XSR(config-router)#network 192.168.1.100
XSR(config)#access-list 1 permit 192.168.1.0 0.0.0.255
XSR(config)#access-list 1 permit 154.68.1.0 0.0.0.255

XSR#copy running-config startup-config

The following configuration sets up RIPv1 with Dynamic Host Configuration Protocol (DHCP)
Relay enabled. DHCP relay is used when no DHCP server exists on the immediate network.

When a local client sends a DHCP request, the XSR relays this request to the appropriate DHCP
server specified by the helper-address. After the server responds, the XSR relays this response back
to the local client. As described below, the XSR connects to the PSTN via a T1 connection with 12
associated channels comprising channel-group 0. This T1 channel group is presented to the XSR as
a serial port and is configured similarly.

The T1 (serial port) connection is unnumbered, indicating packets from the T1 interface will use
the IP address of the Ethernet interface instead of its own.

XSR(config)#controller t1 0/2/0
XSR(config-controller<T2/0>)#channel-group 0 timeslots 1-12
XSR(config-controller<T2/0:1-12>)#no shutdown

XSR(config)#interface fastethernet 1
XSR(config-if<F1>)#no shutdown
XSR(config-if<F1>)#ip address 192.168.1.100 255.255.255.0
XSR(config-if<F1>)#ip helper-address 154.68.1.1

XSR(config-if<F1>)#interface serial 2/0:0
XSR(config-if<S2/0:0>)#no shutdown
XSR(config-if<S2/0:0>)#encapsulate ppp
XSR(config-if<S2/0:0>)#ip unnumbered fastethernet 1

XSR(config)#router rip
XSR(config-router)#network 192.168.1.100
XSR#copy running-config startup-config

Advertising