Enterasys Networks Security Router X-PeditionTM - Manual (Page 394)

AAA Services
16-8 Configuring Security on the XSR
Figure 16-8 PuTTY Alert Message
7. The SSH login screen will appear as shown in Figure 16-9 . Login with Admin and no
password unless you created both values earlier.
Figure 16-9 PuTTY Login Screen
8. Back on the CLI, enter session-timeout ssh <15-35000> to set the idle timeout period.
9. Optionally, if you want to tighten security on the XSR, enter ip telnet server disable to
deactivate Telnet.
10. Enter aaa user <name> to create an authenticated user and acquire AAA user mode.
11. Enter password <your password> for the newly created user.
12. Enter privilege 15 to set the highest privilege level for the user.
13. Enter policy ssh to enable SSH access for the user.
14. Enter exit to quit AAA user mode.
15. Enter aaa client ssh to enable AAA client SSH user authentication.
If you also want to enable Telnet, enter aaa client telnet. The XSR is now ready to connect the
remote login user.
16. Enter session-timeout telnet <15-35000> to set the idle timeout period.
17. Perform Step through Step .