Enterasys Networks Security Router X-PeditionTM - Manual (Page 67)

Utilizing the Command Line Interface
XSR User’s Guide 2-31
4. Using TFTP, transfer updateBootrom.fls from the network:
XSR-1805# copy tftp://192.168.27.95/C:/tftpDir/ updateBootrom.fls
flash:updateBootrom.fls
Copy 'tftpDir/updateBootrom.fls' from server
as 'updateBootrom.fls' into Flash(y/n) ?
y
!!!!!!!!!!!!!!!!!!!!!!!!!!
Download from server done
File size: 667172 bytes
5. Copy boot-config to restore-boot-config :
XSR-1805# copy flash:boot-config flash:restore-boot-config
Copy 'boot-config' from flash: device
as 'restore-boot-config' into flash: device(y/n) ?
y
copying file flash:boot-config -> flash:restore-boot-config
Copy OK: 12 bytes copied
12 bytes copied
6. Reconfigure boot-config to boot updateBootrom.fls :
XSR-1805(config)# boot system updateBootrom.fls
updateBootrom.fls saved into flash:boot-config
7. Display the current list of files and the contents of boot-config and restore-boot-config to
verify the transfers went smoothly:
XSR-1805# dir
Listing Directory flash:/
size
date time name
208 OCT-31-2002 09:34:16 startup-config
3244017 OCT-31-2002 09:32:46 xsr1800.fls
820136 OCT-31-2002 09:40:42 bootrom.fls
667172 OCT-31-2002 09:42:06 updateBootrom.fls
18 OCT-31-2002 09:44:10 boot-config
12 OCT-31-2002 09:43:44 restore-boot-config
1,984,512 bytes free
6,727,680 bytes total
XSR-1805# more boot-config
updateBootrom.fls
XSR-1805# more restore-boot-config
xsr1800.fls
8. This is a critical step and all previous steps must be completed accurately before proceeding.
Reload and wait a couple of minutes. You will lose your Telnet session as the system reboots.
The XSR will run
updateBootrom.fls and update the Bootrom into the boot flash sectors.
Power must not be interrupted since a power failure or interruption may render the XSR
unusable. The file,
restore-boot-config , will be renamed to boot-config and
updateBootrom.fls and bootrom.fls will be removed before the router is rebooted again.
XSR-1805#reload
Proceed with reload (y/n) ?
y
9. Verify that the system is up by remotely logging in via Telnet. Enter show version and
check the new Bootrom version.