Enterasys Networks Security Router X-PeditionTM - Manual (Page 221)

Configuring Frame Relay
XSR User’s Guide 9-13
Andover(config-if<S2/0>)#frame-relay lmi-type ANSI
Andover(config-if<S2/0>)#frame-relay traffic-shaping
Andover(config-if<S2/0>)#frame-relay class frf12
Andover(config-if<S2/0>)#no shutdown
Configure Serial sub-interface 2/0.1 for a point-to-point connection with DLCI 980:
Andover(config)#interface Serial 2/0.1 point-to-point
Andover(config-subif<S2/0.1>)#ip address 10.10.10.2 255.255.255.0
Andover(config-subif<S2/0.1>)#no shutdown
Andover(config-subif<S2/0.1>)#frame-relay interface-dlci 980
On the Montreal XSR, create the QoS class maps similar to those on the New York XSR:
Montreal(config)#class-map Tos4
Montreal(config-cmap<Tos4>)#match ip precedence 4
Montreal(config-cmap<Tos4>)#class-map EF
Montreal(config-cmap<EF>)#match ip dscp 46
Montreal(config-cmap<EF>)#class-map match-any AF1
Montreal(config-cmap<AF1>)#match ip dscp 10
Montreal(config-cmap<AF1>)#match ip dscp 12
Montreal(config-cmap<AF1>)#match ip dscp 14
Configure the QoS policy map Voice with scheduling and bandwidth policy criteria for the EF,
Tos4, AF1 classes:
Montreal(config-cmap<AF1>)#policy-map Voice
Montreal(config-pmap<Voice>)#class EF
Montreal(config-pmap-c<EF>)#priority high 2
Montreal(config-pmap-c<EF>)#class Tos4
Montreal(config-pmap-c<Tos4>)#priority medium 48
Montreal(config-pmap-c<Tos4>)#class AF1
Montreal(config-pmap-c<AF1>)# bandwidth percent 20
Configure the policy map frf12 with criteria similar to those on the New York XSR:
Montreal(config)#map-class frame-relay frf12
Montreal(config-map-class<foo>)#frame-relay cir out 32000
Montreal(config-map-class<foo>)#frame-relay bc out 4000
Montreal(config-map-class<foo>)#frame-relay be out 5000
Montreal(config-map-class<foo>)#frame-relay fragment 53
Montreal(config-map-class<foo>)#service-policy out Voice
Montreal(config-map-class<foo>)#exit
Configure Serial interface 2/0 with FR parameters including traffic shaping:
Montreal(config-if<S2/0>)#media-type V35
Montreal(config-if<S2/0>)#encapsulation frame-relay
Montreal(config-if<S2/0>)#frame-relay lmi-type ANSI
Montreal(config-if<S2/0>)#frame-relay traffic-shaping
Montreal(config-if<S2/0>)#frame-relay class frf12
Montreal(config-if<S2/0>)#no shutdown
Configure Serial sub-interface 2/0.1 for a point-to-point connection with DLCI 960:
Montreal(config)#interface Serial 2/0.1 point-to-point
Montreal(config-subif<S2/0.1>)#ip address 10.10.10.3 255.255.255.0
Montreal(config-subif<S2/0.1>)#no shutdown
Montreal(config-subif<S2/0.1>)#frame-relay interface-dlci 960