Enterasys Networks Security Router X-PeditionTM User Manual
Page 434
System Alarms and Events
A-12 Alarms/Events, System Limits, and Standard ASCII Table
T1E1
Receive Remote Alarm Indication (Yellow
Alarm).
Indicates that T1/E1 physical port is detecting RAI Alarm.
T1E1
Receive RAI alarm cleared.
Indicates that T1/E1 physical port is not detecting RAI Alarm.
T1E1
Receive Alarm Indication Signal (Blue Alarm).
Indicates that T1/E1 physical port is detecting AIS Alarm.
T1E1
Receive AIS cleared.
Indicates that T1/E1 physical port is not detecting AIS Alarm.
T1
Cablelength long failed for slot/card/port.
Configuration command sent to driver returned an error.
T1
Cablelength short failed for slot/card/port.
Configuration command sent to driver returned an error.
T1
Bert start failed for slot/card/port.
Configuration command sent to driver returned an error.
T1
Bert profile failed for slot/card/port.
Configuration command sent to driver returned an error.
T1
Bert abort failed for slot/card/port.
Configuration command sent to driver returned an error.
T1
Clear controller counter failed for slot/card/port.
Configuration command sent to driver returned an error.
T1
Load channel failed for slot/card/port:channel.
Load command sent to driver returned an error.
T1
Unload channel failed for slot/card/port:channel. Unload command sent to driver returned an error.
T1
Start channel failed for slot/card/port:channel.
Start command sent to driver returned an error.
T1
Delete channel interface failed for slot/card/
port:channel.
Interface object delete could not be executed.
T1
Create channel interface failed for slot/card/
port:channel.
Interface object create could not be executed.
T1
Clock source failed for slot/card/port.
Configuration command sent to driver returned an error.
T1
CRC failed for slot/card/port:channel.
Configuration command sent to driver returned an error.
T1
FDL failed for slot/card/port.
Configuration command sent to driver returned an error.
T1
Framing failed for slot/card/port.
Configuration command sent to driver returned an error.
T1
Invert data failed for slot/card/port:channel.
Configuration command sent to driver returned an error.
T1
Linecode failed for slot/card/port.
Configuration command sent to driver returned an error.
T1
Loopback configuration failed for slot/card/port.
Loopback command sent to driver returned an error.
T1
Loopback stop failed for slot/card/port.
Loopback stop command sent to driver returned an error.
T1
Load controller failed for slot/card/port.
Load command sent to driver returned an error.
T1
Unload controller failed for slot/card/port.
Unload command sent to driver returned an error.
T1
Start controller failed for slot/card/port.
Start command sent to driver returned an error.
T1
Stop controller failed for slot/card/port.
Stop command sent to driver returned an error.
T1
Bind controller failed for slot/card/port.
Bind command sent to driver returned an error.
T1
Delete controller object failed for slot/card/port.
T1E1 controller object delete could not be executed.
T1
Create controller object failed for slot/card/port.
T1E1 controller object create could not be executed.
SYNC_
DRIV
Recoverable error
XSR has a hard recoverable error.
Table A-8 Low Severity Alarms/Events (continued)
Module
Message
Description