PLANET ATA-150 - Manual (Page 18)

Connection Type Description – PPPoE
PPPoE Set LAN interface as PPPoE mode.
Set user name of PPPoE connection User Name
Default : Null
Set password of PPPoE connection Password
Default : Null
Set Service Name of PPPoE for description Service Name
Default : Null
Set PPPoE connection type to be Continuous/ Connect on
Demand/ Manual. If user set type as Continuous, ATA will keep
trying to connect to server when PPPoE disconnect. If user set
type as Connect on Demand, please set following idle time, ATA
will check connection after this time. If user set type as Manual,
ATA will only connect or disconnect by press Connect or
Disconnect manually.
Connection Type
Default : Continuous
- 18 -