PLANET ATA-150 - Manual (Page 34)

- 34 -
Mode There are TFTP / FTP and HTTP three ways to provide the auto
upgrade function.
TFTP Server Address Input the TFTP Server address, and it could input the IP or
Domain Name form.
HTTP Server Address Input the HTTP Server address, and it could input the IP or
Domain Name form.
HTTP File Path Set up the file path.
FTP Server Address Input the FTP Server address, and it could input the IP or
Domain Name form.
FTP Username The login username.
FTP Password The login password
FTP Path Set up the file path.
Check new firmware The ATA will according to the below ways to check the new
firmware.
- Power On: The machine will check the new firmware
when power on and following the scheduling date and
time.
- Scheduling: The machine will follow the scheduling date
and time to check the new firmware.
Scheduling Day The ATA will check the new firmware every the interval time. The
range is 1~30 days.
Scheduling Time The ATA will check the new firmware between the time range by
random.
Automatic Update There are Notify only and Automatic ways to update.
- Notify only: If there are new firmware, the ATA will send
the “Be Be Be” sounds when pick up the handset to
prompt there are new firmware.
- Automatic: The ATA will carry firmware update out
automatically.
File Prefix It will check the information of model name.
Next update time It will show the next check date and time.