PLANET ATA-150 - Manual (Page 6)

1 1
Chapter 1
Introduction
Overview
Based on years of VoIP manufacturing experiences, PLANET Technology VoIP total solutions are
known for advanced implementation of standards based telephony with mass deployment capability.
Cost-effective, easy-to-install and simple-to-use, the PLANET ATA-150/ATA-150S VoIP Phone Adapter
(“ATA” in the following term) converts standard telephones to IP-based networks. The service providers
and enterprises can offer users traditional and enhanced the telephony communication services via the
existing broadband connection to the Internet or corporation network.
With the ATA, home users and companies are able to save the installation cost and extend their past
investments in telephones, conference and speakerphones. The ATA equipped with two telephony
interfaces, users may register to different SIP proxy servers, IP PBX and establish up to 2 concurrent
VoIP calls for more flexibility in the voice communications. ATA can be the bridge between the
traditional analog telephones to IP network with an extremely affordable investment.
Product Features
• Feature-rich telephone service over home Internet / Intranet connection
• Up to 2 concurrent VoIP calls
• Cost-effective, easy-to-use solution for Analog Telephone Adapter
• Web-based utility and machine configuration
• Remote administrator authentication
• Voice prompt for machine configurations
VoIP Features
• SIP 2.0 (RFC3261) compliant
• Voice codec: G.711(A-law /μ-law),G.729 AB, G.723 (6.3 Kbps / 5.3Kbps)
• FoIP : T.38 FAX Relay, G.711 Fax pass-through
• QoS : IP TOS (IP Precedence) / DiffServ
• Call Waiting / Hold / Resume / Transfer / Forward /
• 3-Way Conference / Caller ID Generation
• VAD / CNG / Dynamic Jitter Buffer
• SNMP v1/v2, TR-069 and Auto Provision
- 6 -