PLANET ATA-150 - Manual (Page 39)

Save / Reload Settings
This page allows you save current settings to a file or reload the settings from the file which was saved
previously. Besides, you could reset the current configuration to factory default.
Save Settings to File Save current settings to a file.
Load Settings from File Browse a file and upload to reload settings.
Reset Settings to Default Press Reset will clean all current configurations and return to
default values.
Password Setup
This page is used to set the account to access the web server of ATA. Empty user name and password
will disable the protection.
User Name Enter user name.
New Password Input password for this user.
Confirmed Password Confirm password again.
Reboot
Press Reboot to reboot system. Please wait for a few minutes and reload web page again.
- 39 -