Appendix a voice communication samples, Peer to peer (p2p) mode, Hint – PLANET ATA-150 User Manual
Page 41
Appendix A Voice communication samples
There are several ways to make calls to desired destination in ATA. In this section, we’ll lead you step
by step to establish your first voice communication via keypad and web browsers operations.
Peer to peer (P2P) mode
Assuming there are two ATA in the network the IP address are 192.168.0.1 and 192.168.0.2
ATA-A
ATA-B
LAN IP address
LAN IP address
(192.168.0.1)
(192.168.0.2)
1
6
8
1
9
2
*
0
2
#
*
*
STEP :
Pick up telephone handset of ATA-A and dial “192.168.0.2#”. Then the phone of ATA-B should
ring. You can do the same thing to the ATA-B.
y
If the IP address of the remote calling party is known,
you may directly make calls by preset number via its IP
address and end with “#”.
-
41
-
L
Hint
y
If the Telephone Adapter is installed behind a
NAT/firewall/ IP sharing device, please make sure the
NAT device support SIP applications before making calls.
Case 2: (Peer-to-Peer mode) ATA-150S Port 1 to Port 2 communications
Supposing one ATA-150S connects to two telephones, just pick up phone 1 and dial
‘192*168*0*1**5061’, phone 2 will ring.
Analog telephone sets are connected to the phone (RJ-11) ports of ATA-150S respectively
192.168.0.1
*
1
6
8
*
1
*
*
0
5
*
1001
1002
0
1
9
2
6
1
#