Canon PowerShot SX720 HS - Manual (Page 118)

118
Before Use
Basic Guide
Advanced Guide
Index
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
5
Choose the camera to connect.
● Once the screen to choose the camera
to connect to is displayed on the
smartphone, choose the camera and pair
it to the smartphone.
6
Configure the privacy settings and
send images.
● Follow steps 8 – 9 in “Adding a
Smartphone” (= 116) to configure the
privacy settings and send images.
Previous Access Points
You can reconnect to any previous access points automatically by
following step 4 in “Adding a Smartphone” (= 116).
● To use the camera as an access point, choose [Switch Network] on the
screen displayed when you establish a connection, and then choose
[Camera Access Point Mode].
● To switch access points, choose [Switch Network] on the screen
displayed when you establish a connection, and then follow the
procedure in “Using Another Access Point” (= 118) from step 4.
Using Another Access Point
When connecting the camera to a smartphone through the Wi-Fi menu,
you can also use an existing access point.
1
Prepare for the connection.
● Access the [Waiting to connect] screen
by following steps 1 – 4 in “Adding a
Smartphone” (= 116).
2
Connect the smartphone to the
access point.
3
Choose [Switch Network].
● Press the [ ][ ] buttons or turn the [ ]
dial to choose [Switch Network], and then
press the [ ] button.
● A list of detected access points will be
displayed.
4
Connect to the access point.
● For WPS-compatible access points,
follow steps 5 – 8 in “Using WPS-
Compatible Access Points” (= 121) to
connect to the access point.
● For non-WPS access points, follow
steps 2 – 4 in “Connecting to Listed
Access Points” (= 123) to connect to
the access point.