Using the self-timer, Using the self-timer to avoid camera shake – Canon PowerShot SX720 HS User Manual
Page 42
42
Before Use
Basic Guide
Advanced Guide
Index
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
2
Shoot.
●
For Still Images: Press the shutter button
halfway to focus on the subject, and then
press it all the way down.
●
For Movies: Press the movie button.
●
Once you start the self-timer, the lamp
will blink and the camera will play a self-
timer sound.
●
Two seconds before the shot, the blinking
and sound will speed up. (The lamp will
remain lit in case the flash fires.)
●
To cancel shooting after you have
triggered the self-timer, press the
[
] button.
●
To restore the original setting, choose [ ]
in step 1.
Using the Self-Timer to Avoid Camera Shake
Still Images
Movies
This option delays shutter release until about two seconds after you
have pressed the shutter button. If the camera is unsteady while you are
pressing the shutter button, it will not affect your shot.
●
Follow step 1 in “Using the Self-Timer”
●
Once the setting is complete, [ ] is
displayed.
●
Follow step 2 in “Using the Self-Timer”
●
The camera does not zoom out automatically while [ ] is
displayed around a detected face, even if you move the camera.
●
When the feature described in “Zooming Automatically According
to the Movement of the Subject (Auto Zoom)” (= 40) is
deactivated, [ ] is displayed around a detected face, and the
camera automatically zooms out when moved.
●
Zooming is not possible while the shutter button is pressed halfway.
●
To deactivate this feature and use only the feature described in
“Zooming Automatically According to the Movement of the Subject
(Auto Zoom)” (= 40), choose MENU (= 29) > [
] tab >
[
Auto Settings] > [Seek Assist] > [Off].
Using the Self-Timer
Still Images
Movies
With the self-timer, you can include yourself in group photos or other
timed shots. The camera will shoot about 10 seconds after you press the
shutter button.
1
Configure the setting.
●
Press the [ ] button, choose [ ] (either
press the [ ][ ] buttons or turn the [ ]
dial), and then press the [ ] button.
●
Once the setting is complete, [ ] is
displayed.