Sony Alpha 9 - Manual (Page 193)

C:\4692676112\4692676112ILCE9UC2\01GB-ILCE9UC2\070WRL.indd
2017/03/15 14:08
ILCE-9
4-692-676-11 (2)
GB
193
Using ne
twork functions
To establish a Wi-Fi connection with a smartphone using
a QR code
 Select MENU  (Network) 
[Ctrl w/ Smartphone] 
[ Connection Info.], to display
the QR code on the monitor of the
camera.
 Launch PlayMemories Mobile on the smartphone, and
select [Scan QR Code of the Camera].
 Scan the QR code.
Follow the steps below only if using an iPhone or iPad.
 Install the profile by following the instructions on the
iPhone or iPad screen.
 On the “Home” screen of the iPhone or iPad, select
[Settings]  [Wi-Fi].
 Select the SSID displayed on the camera.
 Return to the “Home” screen of the iPhone or iPad and
launch PlayMemories Mobile.
Hint
• Once the QR code has been read, this product’s SSID (DIRECT-xxxx) and
password are registered to the smartphone. This enables you to easily
connect the smartphone to the product via Wi-Fi at a later date by
selecting the SSID.
Note
• If you cannot connect this product to a smartphone using the
NFC function or QR code, use the SSID and password. For detailed
instructions, refer to the “Help Guide.”