Sharp MX-6070N User Manual
Page 30
30
Troubleshooting
• Problem with Windows P.42
• How to check the IP address of this
Windows/Display the software selection screen (common procedure)
Installing others
Changing ports
7. Select [Custom], and click the [Next] button
The "Port setup" screen is displayed.
8. Setup the port
Choose either of the below and click the [OK] button.
• [Protocol] Raw / [Port number] 9100
• [Protocol] LPR / [Queue Name] lp
9. Click the [Next] button of the step 4 screen
10. Click the [Finish] button
11. Click the [Close] button on the step 1 screen
• When using a port created by an OS standard "Standard TCP/IP Port",
click the [Configure Port...] button on the step 3 screen and set the
[SNMP Status Enabled] checkbox to
. If it is set to
. the printer
may not function correctly.
STEP 7-11/11