Formatting usb flash drives, Changing cross-point assignments, Returning to the factory settings (factory reset) – Roland V-600UHD 4K HDR Multi-Format Video Switcher User Manual
Page 28: T (p. 28) also changes the or, 600uhd (p. 28), Other operations
28
Other Operations
Formatting USB Flash Drives
When you’re using a USB flash drive for the first time, it must first be
formatted on the V-600UHD.
NOTE
5
The V-600UHD does not recognize unformatted USB flash drives.
5
Operation has been tested for commonly available USB flash
drives, but operation of all USB flash drives is not assured.
Depending on the manufacturer and type of the USB flash drive,
correct operation may not be possible.
5
Performing formatting causes all data already saved on the USB
flash drive to be deleted. If the flash drive contains necessary data,
back it up onto a computer or elsewhere before formatting the
drive.
5
Depending on the USB flash drive, recognition of the flash drive
might take some time.
1 .
Select the [MENU] button
&
“System”
&
for USB
Memory, select “Format,” and press the [VALUE]
knob.
The message “Are you sure?” appears.
If you want to cancel the operation, select “NO,” and press the
[VALUE] knob.
2 .
Select “YES,” and press the [VALUE] knob.
Formatting of the USB flash drive is carried out.
3 .
Press the [MENU] button to quit the menu.
Changing Cross-Point Assignments
You can change the channels assigned to the cross-point [1]–[8]
buttons.
1 .
Select the [MENU] button
&
“System”
&
“Cross-point Assign,” and press the [VALUE] knob.
2 .
Select cross-point cross point (from XPT1 to 8),
then use the [VALUE] knob to specify the channel
number (Ch. 1 to 8) to assign to the cross point.
Value
Explanation
Ch.1–8
Assigns an input channel.
Blank
Assigns no input channel. If you press the cross-
point button, a black screen is output.
None
Disables operation of the cross-point button.
3 .
Press the [MENU] button to quit the menu.
Returning to the Factory Settings
(Factory Reset)
You can return the values of settings on the V-600UHD to their
factory defaults.
NOTE
Executing a factory reset causes all values that have been set, settings
saved in memories (p. 26), and still images saved in the unit to be
lost.
1 .
Select the [MENU] button
&
“System”
&
“Factory Reset,” and press the [VALUE] knob.
The message “Are you sure?” appears.
If you want to cancel the operation, select “NO,” and press the
[VALUE] knob.
2 .
Select “YES,” and press the [VALUE] knob.
A factory reset is executed.
3 .
Press the [MENU] button to quit the menu.