Roland V-600UHD 4K HDR Multi-Format Video Switcher - Manual (Page 33)

33
Menu List
HDMI/RGB IN1, HDMI IN2–4, SDI IN5–6, STILL1, PG/STILL2 0 [VALUE]
Menu item Value (Bold: default) Explanation
Source
HDMI IN1 , RGB IN1 This sets the input connector assigned to channel 1.
PG , STILL2 This assigns a pattern generator (Test Pattern) or still image to channel 8.
EDID
Internal
4096x2160, 2160p(DCI)
3840x2160, 2160p(UHD)
1920x1080, 1080p
1080i
1920x1200
1600x1200
This selects the EDID specified for the HDMI IN 1–4 connectors.
Still Image Memory
(*1)
1–8
Selects the memory number in which the still image is saved, and assigns
the still image to either STILL1 or STILL2.
* Memory numbers that contain a still image are indicated by a “ ” symbol.
Color Correction
You use the following items to perform color correction.
* Not available when source is “PG.”
Brightness -64– 0 –+63 This adjusts the brightness.
Contrast -64– 0 –+63 This adjusts the contrast.
Saturation -64– 0 –+63 This adjusts the color saturation.
Red -64– 0 –+63 This adjusts the red level.
Green -64– 0 –+63 This adjusts the green level.
Blue -64– 0 –+63 This adjusts the blue level.
Color Gamut
Rec.709, Rec.2020, RGB Full, RGB Limited, Auto This part select color gamut or color spaces of Input Ch.1–6.
RGB Full , RGB Limited
This part select color gamut or color spaces of Input Ch.7–8.
* In the case of a captured still image, this shows the color space of the
image.
Dynamic Range
Type SDR, HDR PQ, HDR HLG, Auto
This part select dynamic range of Input Ch.1–6.
* The dynamic range of Input Ch.7–Ch.8 cannot be changed.
5 In the case of a still image loaded from a USB flash drive, this is fixed at
SDR.
5 In the case of a captured still image, this shows the dynamic range of
the image.
Correction -64– 0 –+63 This adjust dynamic range.
Sampling
You use the following items for make settings for sampling.
* Available when Source is set to “RGB IN1.”
Auto Sampling Execute This executes automatic settings for sampling.
Frequency -8– 0 –+8 This adjusts the sampling frequency.
Phase -8– 0 –+8 This adjusts the sampling phase.
Gain -20– 0 –+20 This adjusts the sampling gain.
Position H -16– 0 –+16 This adjusts the horizontal start position of sampling.
V -16– 0 –+16 This adjusts the vertical start position of sampling.
Pattern (*2)
Colorbar75% , Colorbar100%, Ramp, Step,
Hatch, Frame, Circle, Red, Green, Blue, White,
Black
Specifies the test pattern.
Motion (*2) Disabled , Slow, Medium, Fast Specifies the scroll speed of the test pattern.
(*1) Only for STILL1 and PG/STILL2 (Source: STILL2).
(*2) Available when Source is set to “PG” in Ch.8.