Roland V-600UHD 4K HDR Multi-Format Video Switcher - Manual (Page 43)

43
Menu List
System
Menu item Value
(Bold: default)
Explanation
Processing ENTER This displays detailed setup menu of processing.
Frame Rate
50, 59.94Hz This sets the frame rate.
* For details on combinations of format and frame rate, refer to “Output Formats” (p. 11).
30, 60Hz
HDCP Off , On This turns on/off the HDCP mode.
Reference This sets the reference clock of the V-600UHD.
Source
Internal The V-600UHD’s internal clock is used as the reference clock.
SDI IN5 A signal input via one of the SDI IN5 connectors is used as the reference clock.
Clock Adjust -4096– 0 –+4096
This adjusts the phase horizontally.
Adjust this when output is horizontally out of sync with the operation of other devices
using the same clock.
Line Adjust -2160– 0 –+2160
This adjusts the phase vertically.
Adjust this when output is vertically out of sync with or field-shifted from the operation of
other devices using the same clock.
Cross-point Assign ENTER This displays detailed setup menu of channel assign to cross-points.
Output Fade ENTER This displays detailed setup menu of output fade.
Multi-view ENTER This displays detailed setup menu of multi-view.
Aux/Composition Composition , Aux This sets which function to use, AUX or Composition.
Menu Here you can make menu-related settings.
Background 0– 4 –7 This adjust the transparency of the menu background.
Position Left , Right This switches the position of menu display.
Memory Protect Off , On When this is set to “On,” the memories are protected, and settings cannot be saved to them.
Auto Memory Off, On Setting this to “On” enables last memory feature.
Memory Delete ENTER This shows the memory delete selection screen.
Still Image Memory Here you can perform operations related to still images.
Load ENTER This displays the screen to select a still image file to load.
Delete ENTER This displays the screen to select a still image file to delete.
Information ENTER This shows information about the still image.
Output Capture ENTER This displays the screen to capture a still image.
Save as ENTER This displays the screen to save the captured still image.
USB Memory You use the following items to work with a USB flash drive.
Parameter Load ENTER This displays the screen to select a setting file to load.
Save ENTER This displays the screen to select a setting file to save.
Save As ENTER This displays the screen to edit the setting file name.
Delete ENTER This displays the screen to select a file to delete.
Format Execute This executes formatting of a connected USB flash drive.
RS-232 Off , On This turns valid/invalid of remote control from an external RS-232 device.
Baudrate 9600, 38400 bps This sets the communication speed (bps) of the RS-232 connector.
GPI ENTER This displays detailed setup menu of GPI.
LAN Control ENTER This displays detailed setup menu of LAN control.
LED Dimmer 0– 7 This adjusts the brightness of the top panel LEDs.
Fader Calibration ENTER This calibrates the video fader.
RGB IN1 Calibration ENTER This calibrates the RGB IN 1.
Factory Reset Execute This returns the unit to its factory defaults.
Version This displays the version of the system program.