Shutter priority, Help guide – Sony PCM-A10 High-Resolution Audio Recorder User Manual

Page 116

Advertising
background image

Help Guide

Interchangeable Lens Digital Camera

ILCE-7RM5

α7RV

Shutter Priority

You can express the movement of a moving subject in various ways by adjusting the shutter speed, for example, at the
instant of the movement with high speed shutter, or as a trailing image with low speed shutter.

Hint

Use a tripod to prevent camera-shake when you have selected a slow shutter speed.

When you shoot indoor sports scenes, set the ISO sensitivity to a higher value.

Note

The SteadyShot warning indicator does not appear in [Shutter Priority] mode.

When [Long Exposure NR] is set to [On] and the shutter speed is 1 second(s) or longer with a [Shutter Type] other than
[Electronic Shutter] is set, noise reduction after shooting is performed for the same amount of time that the shutter was open.
However, you cannot shoot any more while noise reduction is in progress.

The brightness of the image on the screen may differ from the actual image being shot.

Related Topic

Long Exposure NR

ISO (still image/movie)

Bulb shooting

5-044-866-11(1) Copyright 2022 Sony Corporation

Set the Still/Movie/S&Q dial to the desired shooting mode.

1

Set the mode dial to S (Shutter Priority).

2

Select the desired value by turning the front dial/rear dial L.

If proper exposure cannot be obtained after setup, the aperture value on the shooting screen blinks. If this
happens, change the shutter speed.

3

Adjust the focus and shoot the subject.

The aperture is automatically adjusted to obtain proper exposure.

4

116

116

Advertising