Sony HVL-F20M External Flash - Manual (Page 22)

22
[System] Page
Use to configure the basic system settings of the
unit.
The screen consists of [Device info], [Option],
and [Date & Time] tabs.
[Device info] tab
[Model Name]
Displays the model name of the unit.
[Serial Number]
Displays the serial number of the unit.
[Software Version]
Displays the software version of the unit.
[Default Dante ID]
Displays the default Dante ID.
[Name]
Enter the name of the unit. Entry is mandatory.
[Description]
Enter a description specified by the user of the
unit.
[Path 1] to [Path 3]
Enter character strings specified by the user
(such as name of building, floor number, room
name). [Path 1] entry is mandatory.
[Option] tab
[Language]
Specify the display language of the screen. You
can select [English], [Japanese], [German],
[French], [Spanish], or [Chinese].
After selecting a language, click the [OK] button
to change the display to the selected language.
[Boot Mode(Main Output)]
Specify the audio output status after booting.
[Normal]: Boot into state with normal audio
output.
[Mute]: Boot into state with audio muted.
[Schedule Reboot]
Set whether to reboot the unit at a specified
time. When set to [On], select the time schedule
for rebooting.
Available settings: 0:00 to 23:00 in 1-hour
increments
[LED]
Specify whether the LED is lit.
When set to [On], the emitted color can be set to
green, amber, or red to indicate the status of the
unit.
[Active]: Select the color of the LED when the
unit is in active state.
[Mute]: Select the color of the LED when the unit
is muted.
[Standby]: Select the color of the LED when the
unit is in standby state.