Print, Calibration, Print bed calibration – XYZprinting Crazy3DPrint CZ-300 DIY 3D Printer User Manual
Page 21: Control, Temperature
19
Info Screen
Prepare
Control
Print from SD
Change SD card
Main
Temperature
Main
Temperature
Control
Nozzle :
210
Bed :
70
Autotemp :
On
Min :
210
Max :
240
Fact :
000.10
Preheat PLA conf
Preheat ABS conf
Min :
210
Max :
240
Fact :
000.10
Preheat PLA conf
Preheat ABS conf
Temperature
Nozzle :
180
Bed :
70
Min :
210
Max :
240
Fact :
000.10
Preheat PLA conf
Preheat ABS conf
Temperature
Nozzle :
240
Bed :
90
CONTROL
1) Select “Control” and press the knob to show the functional menu.
Temperature
1) Select “Temperature” and press the knob to show the advanced setting menu.
2) Select “Preheat PLA conf” and press the knob for pre-heating when using PLA filament.
3) Select “Preheat ABS conf” and press the knob for pre-heating when using ABS filament.
PRINT BED CALIBRATION
1) Prepare a sheet of A4 paper for calibration.
It is suggested to use a standard folded A4 paper for printing material of PLA; non-folded for ABS.