XYZprinting Crazy3DPrint CZ-300 DIY 3D Printer - Manual (Page 30)

28
Info Screen
Prepare
Control
Print from SD
Change SD card
Main
Crazy3DPrint_sample.gcode
FIRST PRINT
It is suggested to do the calibration every time before printing for better outcomes. Users may refer the
procedure from the section of PRINT BED CALIBRATION.
PRINT FROM SD CARD
1) Insert a SD card to the slot; following select “Print from SD” and choose the file.
PRINT FROM THE CABLE
1) Prepare the USB cable4-1 to connect the control box with your laptop or computer; following open the file with
software generated G-code.
Each superscript number refers to the tools kit listed in the table of accessory checklist. If there is no
suitable serial port driver, please follow the next setting guide.
INSTALLING USB-SERIAL DRIVERS
1) Open the “Device Manager” in the “Computer Management” window; following right click “USB Serial” and select
“Update driver”.
2) Select “Browse my computer for driver software”; following browse a suitable driver file for the version of your
Windows.