XYZprinting Crazy3DPrint CZ-300 DIY 3D Printer - Manual (Page 23)

21
SOFTWARE SETTINGS
The CZ-300 printer can make your scratch design become solid objects with generated G-code from 3D files by using
software such as Slic3r, and Cura etc.
This manual assumes that users have already had the up-to-date version of software well-downloaded and installed
under relevant operating system. Crazy3DPrint provides the installation file – CZ-300_3D Printer_Cura_Set-
up_1.0.4.exe & CZ-300_3D Printer_Slic3r_Setup_1.0.3.exe – for users easily setting up the parameters in terms of
printer dimensions, extruder details, and other specific commands.
Support Cura and Slic3r and you can download the profile from below URL
1. Cura : https://ultimaker.com/software/ultimaker-cura
2. Slic3r: https://slic3r.org/download/
Users can find the software from “Software Folder” in the SD Memory Card 12 ; or download it from the
website via: https://www.crazy3dprint.com/support
CURA SOFTWARE – 3D PRINTER MANUAL SETTING
1) After installation, double-click the Cura icon to display the default page.
2) Select “Add Printer” -> “Other” -> “Crazy3DPrint CZ-300”; following add the printer.
3) It is suggested that users preset the parameters as below for better print results:
4) Select “Manage printers” -> “Profiles”, and click “Import” .