Canon WFT-R10A Wireless File Transmitter for EOS R5 C & R5 Mirrorless Camera - Manual (Page 28)

Displaying the Connection Wizard
This section describes how to add connection settings by following the connection wizard.
If an error is displayed, see
Troubleshooting and check the settings.
Pressing the shutter button or other camera controls during configuration using the
connection wizard will close the connection wizard. Do not press the shutter button or
other controls until configuration is finished.
[
: WFT settings ] is only available when [ : Multiple exposure ] is set to [ Disable ].
1.
Press the 〈 〉 button on the camera.
2.
Select [ : WFT settings].
3.
Select [Enable].
4.
Select [Connection settings].
28