Introduction – Canon WFT-R10A Wireless File Transmitter for EOS R5 C & R5 Mirrorless Camera User Manual
Page 4
Introduction
Before Using This Transmitter, Be Sure to Read the Following
To comply with local radio wave regulations, Canon offers five region-specific versions
of the transmitter (A, B, C, D, and E) in various areas around the world (see separate
sheet). For convenience, the transmitter in this guide is referred to as WFT-R10, without
reference to versions A, B, C, D, or E.
In this guide, the term “access point” refers to devices such as wireless LAN access
points or wireless LAN routers that relay a LAN connection.
These instructions should be followed only after setting up your LAN and FTP server
environments. For information about setting up the environments, refer to the
documentation provided with each device or contact the manufacturer.
Read the Camera's Advanced User Guide and familiarize yourself with operating the
camera before following the instructions on camera options.
This transmitter cannot be directly connected to a telecommunication carrier's
communication line. When connecting this transmitter to the internet, make sure to
connect it through a router.
Support
Image transfer requires adequate knowledge of configuring your LAN and FTP server.
Canon cannot provide support for configuring LANs or FTP servers.
Liability
Note that Canon cannot be held liable for any loss or damage to the transmitter from
erroneous network or FTP server settings. In addition, Canon cannot be held liable for
any other loss or damage caused by use of the transmitter.
When using LAN functions, establish appropriate security at your own risk and
discretion. Canon cannot be held liable for any loss or damage caused by unauthorized
access or other security breaches.
•
What You Can Do with the Transmitter
•
•
•
•
•
4