Ericsson BS260 - Manual (Page 109)

Not
f
or Comm
e
rc
ia
l Use
E
ricsson Mobile
Com
m
unic
a
ti
ons A
B
108 Reference
Do I get a warning before the batteries run out?
An alarm sounds when approximately fifteen minutes’ calling time is left.
How can I subscribe a handset to a base station?
To subscribe a handset you need the authentication (PIN) code of the base sta-
tion. How to subscribe is explained in “Subscribing to a base station” on
page 100.
What should I do if the handset dials a number as soon as I press
a key?
A direct call has been set. See “Direct call” on page 81.
What should I do if I do not hear anything when I pick up the
handset and the red light on the base station is flashing?
The base station is not properly connected to the telephone line. Check the
telephone line cable.
Why do I keep on hearing the dial tone after I have dialled a
number?
If you dial a number and still hear the dial tone, you probably have to set the
base station to another dialling method. See “Pulse or tone dialling” on
page 94 for more details.
I cannot understand the language of the voice guide. Why?
An incorrect language has been selected. The voice guide is available in two
languages. To select the other language, see “Voice guidance” on page 71.
I cannot understand the language on the display. Why?
An incorrect language has been selected.
To correct this:
1. Press CL R .
The handset returns to the standby display.
2. Press 5 x U P , YE S , 3 x U P and Y E S . Select the language of your choice
from the list and press Y E S .
Some menu options are in another language on the display. Why?
These options are the base station menus which form a part of the handset
menus. They are normally in the same language as the handset menus. If the
handset language is not available, the base station chooses English by default.