Ericsson BS260 - Manual (Page 110)

Not
f
or Comm
e
rc
ia
l Use
E
ricsson Mobile
Com
m
unic
a
ti
ons A
B
Reference 109
To choose another default language:
1. Press CL R .
The handset returns to the standby display.
2. Press 4 x U P , Y E S , 1 x U P , Y E S , 3 x D O W N , Y E S , enter the PIN code for
the base station (see page 78), 2 x Y E S . Select the language of your choice
from the list and press Y E S .
I have entered an incorrect PIN code three times in a row. How can
I set a new PIN code?
If you have entered an incorrect PIN code three times in a row, the current
code is invalidated. If the handset PIN code is invalidated, the handset cannot
be used any more. To reset the PIN code, see “Resetting the base station PIN
code” on page 77 and “Unblocking the handset” on page 75.
I cannot switch on the handset by pressing N O for at least two
seconds. Why?
Put the handset in the base station. If the display comes on, the battery is
almost flat. Leave the handset in the base station to charge the battery. If the
display remains off after charging, the handset is defective or the battery is not
properly connected or may need replacing. See “Battery” on page 12.
I have placed the handset in the base station but the green
charging light does not come on. Why?
Ensure that the handset is placed properly in the base station and the base sta-
tion is on. If the battery is completely flat, leave the handset in the base station
to charge the battery. The green charging light will turn on after a few minutes.
I know that someone is calling me, but the ring signal is not
ringing. Why not?
If you can see the ring off icon, it means that the volume of the ring signal has
been set to zero, or the ring signal is switched off temporarily. If the ring sig-
nal has been switched off temporarily, it comes back on when you hang up.
For increasing the volume of the ring signal, see “Ring volume” on page 56.
I cannot call certain numbers. Why not?
Call barring is on or your call budget has been exceeded. For further details,
see “Call barring” on page 83 and “Call budget” on page 86.
The external line light on the base station is flashing quickly.
Why?
There is a problem with the connection between the base station and the tele-
phone line. Check the telephone line cable. See “Preparing for use” on page 9.